How to use your D-Link 2640T router to link up and remotely view 2 CCTV(DVR) system
Follow the steps below.
1. Get a www.Dyndns.org account if you have a dynamic ip. (Dynamic IP addresses change all the time when you connect to your internet service provider, on the other hand static IP will always remain the same and you can also check it via www.canyouseeme.org <–keep this handy we’ll use it later)
2. Make sure both of your CCTV / DVR system supports network viewing. Set both systems to have different individual static ip and ports.
Example :
1st DVR system IP ADD = 192.168.1.122 [port = 98]
2nd DVR system IP ADD = 192.168.1.123 [port = 99]
3. Now log in to your D-Link router via http://192.168.1.1(default username = admin and password = admin) and select the Dynamic DNS page. There you will see a dropdown box with the option to select the www.dyndns.org account. Key in your account details and the hostname which you have created at dyndns.org.
Example :
ddns = mycctv.dyndns.org
username = (dyndns.org username) password = (dyndns.org password)
4. Now select the DMZ and enable it by keying in one of your DVR system’s IP address
Example :
1st DVR system IP ADD = 192.168.1.122
5. Go to the LAN Clients page and add both the DVR system’s IP addresses to the Static IP category.
Example :
1st DVR system IP ADD = 192.168.1.122 [hostname = anthing1]
2nd DVR system IP ADD = 192.168.1.123 [hostname = anything2]
6. Now go to the virtual server page and select the IP address which you have just added and create a port mapping rule.
How to :-
Select 1st DVR system IP ADD = 192.168.1.122
Click on the user radio button and click ADD button below the selection box, inside this page you’ll have to specify a rule name (example port98), key in your port number which links to your IP ADD (example 98) in all the four text box below and click save.
Now go back to the Virtual server page and add the rule to your IP above. To add the rule select the IP address you want, click on the user radio button there you will see the rule which you just created click on the ADD button on the right of the rule selection box.
Do the same for the 2nd DVR system’s IP (192.168.1.123) and remember to create the new rule which specify the other port number (99).
7. Click on Tools -> System -> and select save and reboot to apply the changes to your D-Link 2640T router.
8. Go to www.canyouseeme.org to check whether your ports are accessible from the internet remotely. If you can well…
9. You can now use the dyndns.org account for remotely viewing your system. Be sure to remember the port number which you are connecting to. Good Luck.
Remember to backup and save your config.
(p/s for mobile phones you can use the softwares here http://211.22.74.18/ to view remotely, there are 4 java application try and see which one can your DVR support.)
If this help you, any amount of donation would be highly appreciated.
Click the link below to donate. Thanks XD
BUY ME A DRINK!
Comments