How to use your D-Link 2640T router to link up and remotely view 2 CCTV(DVR) system
1st and foremost before you read this, pardon me if there were any errors or misleading guidelines found here k… this is just for sharing, I’m interested if there was another solution to it… Follow the steps below. 1. Get a www.Dyndns.org account if you have a dynamic ip. (Dynamic IP addresses change all the time when you connect to your internet service provider, on the other hand static IP will always remain the same and you can also check it via www.canyouseeme.org <–keep this handy we’ll use it later) 2. Make sure both of your CCTV / DVR system supports network viewing. Set both systems to have different individual static ip and ports. Example : 1st DVR system IP ADD = 192.168.1.122 [port = 98] 2nd DVR system IP ADD = 192.168.1.123 [port = 99] 3. Now log in to your D-Link router via http://192.168.1.1(default username = admin and password = admin) and select the Dynamic DNS page. There you will see a dropdown box with the option to select the www.dyndns.org account...